Leaderboard

Sunset run in the mountains Sent from my SM-G960U using Tapatalk

Speaking of DIY ditch lights, heres stock: vs center light bar and ditch lights n I did slightly readjust the lights after this photo too

Us professional mechanics call those "extra" parts "over the shoulder parts".

Hm that is strange, since we both have an '02 when I swapped everything to LED's I never had that issue with the cruise control shutting itself off. The only thing I did was install the new blinker relay to stop the hyperflash of the blinkers.

Do those powervalves while you’re in there too

You'll find a lot of lift kit info in old threads if you poke around. You might try 4x4parts or Rugged Rocks. I've heard little to recommend Calmini's customer service and can't afford their prices anyway. You'll also need to beef up your steering linkage to deal with the lift. Bumper options are mostly roll-your-own at this point. ARB used to make a front bumper, but they're expensive if you can find them. KMA or TAG or whatever they're called this week made Pathy bumpers, no idea if whoever took that over does anymore. If you find a bumper for a Hardbody pickup, you'll need to modify the brackets to make it work on a Pathfinder. Many WD21s came stock with a spare holder that's actually pretty stout. They can be fitted to a truck that didn't come with one, if you get the bolt plates that go inside the fender and don't mind doing some screwing around to make them work. I'm not sure I've seen an aftermarket roof rack strictly for these. Some people have adapted the stock Xterra roof rack to fit. Others come up with mounts for universal racks, or, again, fab their own. I've seen some pretty good-looking racks made from EMT conduit.

I have replaced all my lights with leds and haven't had that problem. However, something else has killed the cruise in my truck. I am suspecting it might be the speed sensor, but haven't delved into it yet, too many other things to do. The led flasher module solved the hyper flash without having to use resistors.

Yup, the wiring is fine but after installing LED bulbs cruise control gets canceled when the turn signal is used. Not a huge problem but just a little annoying.

Little update since I haven’t been on here in forever. The very next weekend after wheeling with Tyler I went and hydrolocked my car because I never got around to relocating the inlet hole of the air box after my plastic wheel well liners got ripped out Got flat towed home and realized I must have broken an axle too because my front end would hop all over if I was in 4wd. Also lost all my power steering fluid and ripped all 4 cv axle boots and both rack and pinion boots. I got it running again a couple days later and pulled it back into the driveway (pics for comparison of how much taller it is than stock) It drives fine at 25 around town (parking lots suck without power steering) but it needs a lot before it’s gonna do anything besides drive around town. Both of my rocker panels are super smashed and have large rust holes in them so I’ve been thinking about cutting them out and welding in a piece of 2x5 square tubing that will double as rockers and sliders. Also if anyone wants to buy the tan one let me know Sent from my iPhone using Tapatalk

I mean sliders are cool and all, I can see how they might be useful, but are you sure your not just tryna copy me? Looks good dude. Can’t wait to see you get some sliders! And for our rigs to get more similar again?

Warning: Don't watch this if you're afraid of body damage ?