Leaderboard

Speaking of DIY ditch lights, heres stock: vs center light bar and ditch lights n I did slightly readjust the lights after this photo too

Before i installed my DIY ditch light project today, found a small trail - thing that was fun

Found out last night, that the photo hosting site I use, Tinypic is shutting down, so I'm sure any and all pics I have posted will be disappearing. I'm going to save all the pics before it shuts down, I should have most if not all of them but want to save them just in case I don't.

Oh crap, I thought you meant the ones holding it to the frame. Yeah, I had those nuts loosen on me as well. Throw a little loctite on there.

Do the threads have good engagement? How much of the bolt is threading in? You may want to get longer ones. M14x1.5x60mm instead of 50mm. A little loctite won't hurt.

Nightmare is an understatement lol. I helped the last mechanic do mine. It still took 4 hours of adjust, drive around the block to settle the bars, recheck, etc.

Yes, adjusting the camber/caster using shims is a PITA and even with the Hunter alignment racks that run the calculations for me I use is still a tedious process when stock and a nightmare when lifted. I would assume the same when lowered, but haven't had to deal with that on the Pathfinders.

Looks like all they adjusted was the toe. The slight changes on the camber and caster is what you will get from setting the toe. Many shops don't know how or are unwilling to adjust the camber and caster or will charge extra for those. From the numbers, I would expect a pull to the left while driving, but if you are not, take the win. With the spaces at the bump stops, that is actually where the front hight measurements are performed. If you are happy with the way it is driving and looking, I wouldn't worry too much about the space difference.

Thanks for your reply... I assumed they would fit, but I'm not extremely knowledgeable about tire sizing. I thought I had read somewhere that someone was running the "75" with some cutting and "70" with no probs.