Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 12/17/2018 in all areas

  1. Update: Scored a killer price on an xj bumper with pre-runner bar online so bit on it. Spent the day getting it mocked up Wasn't too bad, but did take nearly all day to do some trial and error research. I think it came out pretty good though. Will definately have to have a plate made to protect the radiator as well as reroute or build a cover for the washer fluid and radiator overflow. For the radiator overflow, I may make something for it. Now I just have to take it back off and have it sprayed. Was also planning to change out the front springs too, but time ran out. Project for another day. Next relatively big project is building a custom rear bumper with a swing arm for my spare and jerry can. Thanks for looking Sent from my SAMSUNG-SM-G930A using Tapatalk
    4 points
  2. Dual swing out tire carrier is done. I thought about building a full bumper but wanted to keep the factory look of the vehicle as much as possible. I have to figure out what to do to pretty-up the hinge holes in the bumper plastic, but other than that it is done. The latch I had to order from Amazon, works perfectly. I used an axle shaft off my old Pathfinder as the wheel mount. I don't care for the look but I like the nostalgia and it is hidden when the tire is attached. These are the best hinges I have found. Double shear, nice bearings and have the nice lockout feature when open. I didn't get a rear facing shot, but I did get a side shot. I can still use the review mirror and see out of the back due to the tire being offset on the passenger side. The driver side swing-out is going to get some rotopax cans and other goodies when I can afford it. The next items on the to-do list are: -Pull transmission/tcase and drop subframe for oilpan gasket/rear seal/oil soaked clutch <- this is going to be the SUCK...maybe over xmas holidays. -Fix the rear passenger fender extender -Build slid out for fridge -Build sleeping area in the back and storage area -Lights Lights and more lights, need lights For the future: I want to go back to having an off-road trailer and I am going one of two ways: Go all out and build a sleep in (tear drop style) trailer that weighs less than 2500lbs or build a roof top tent trailer that weighs less than 1000lbs. I am leaning towards the tear-drop style sleep in with a spot for the roof top tent on top. This sounds like a good excuse to become proficient at aluminum welding. The rooftop tent weights 125, tires and wheels about 180, axle about 45 , and at least 15 gallons of water 120 so that is a start off weight of 485.
    3 points
  3. I only use Mobil 1 full synthetic and a Mobil 1 oil filter on my vehicles. That's what I've been doing for the last twenty years. I try to change the oil every 10k miles, but sometimes it goes further. I've never had an issue with the engine oil such. I used to use whatever the quick oil change place did until I slung a rod in my Sentra. Since then I've changed my own oil and used high quality items.
    2 points
  4. After years of chatting about our own Pathfinder projects—and often, grumblings about having to make our own parts or hack together something—it’s become clear that Jacob (@TowndawgR50) and I (Patrick) have a common passion for our trucks. We’re always bouncing ideas around and sanity-checking each other’s work, ultimately realizing we have highly complementary skill sets that extend beyond working on trucks. We’ve also grown tired of a serious lack of aftermarket support for our trucks, especially when there’s an obvious demand to keep them on the road and make them more capable than they already are. To counter that, we’re teaming up to fill that void. That’s right: it’s time to turn a hobby into a business! In the weeks to come, we will be making more announcements regarding the status of the company (still working on the name!) and our product offerings. We’re still in the early stages of the company formation, and have some challenges ahead of us (most notably the 1,400 miles that separate us!), but we’re ready and stoked to get the word out there. If any of our individual projects have piqued your interest, then our collaborative efforts won’t disappoint. Our initial focus will be on subframe drop (SFD) kits, as this is the most important component required to move beyond 2” of front suspension lift. Unlike prior versions of kits that have existed, we intend to offer complete kits and à la carte components in multiple heights—including strut spacers—to support various lift configurations. Our particular focus is to provide high-quality finished products that simplify installation for the average DIYer (hint: strut disassembly not required), and without having to replace aftermarket components you’ve already purchased. While we won’t go into detail about all the products (and services) we’ve been discussing, we will tease that trailing arms and panhard bars (both in static lengths with poly bushings, and adjustable lengths with rebuildable joints), skid plates, missing link, and bumper brackets are on the product roadmap. That said, we’re looking forward to a productive 2019, so stay tuned!
    1 point
  5. Pretty interesting stuff here.
    1 point
  6. Update: Went off-roading Saturday afternoon and hit some fun trails... really showed off my sagging springs in the rear though. Lift is going in today and I’m so excited to not feel like I’m going to flip every time I go around a corner, and I’m not even going fast [emoji51]. Saw this picture and it made me laugh because I feel like this is everybody on this forum lol
    1 point
  7. Looks good! Fill in the gaps under the lights and it would look like it was made to fit.
    1 point
  8. Drove to store and resisted the temptation to turn on the flashing lights from the led light bar at the guy in front of me who kept slamming on brakes...
    1 point
  9. Haha yes, it’s true.. but if there was a capable quality domestic option, I’d be a buyer.
    1 point
  10. I do apologize for this pic. I never go 4 wheeling and very rarely does my Quey get dirty. I'm OCD when it comes to cleanliness. I have the up most respect for the guys who put the time, money and effort in to building their rigs. I'm more of a factory spec OEM kinda guy. That said I've never won truck of the month. That might be the reason. This Quey was 100% ready for a junk yard trip, but I have a deep passion for working on them so I brought it back to life with a little (or maybe A LOT) of TLC. If you want to know how to clean something on your r50 or any cosmetics I'm the guy. If you need to know about a lift, bigger tires or spacers I have no clue. All I know is I love these trucks and I LOVE NPORA. I know this might sound crazy, but my R50's saved my life. Good luck (TOTM December) Mr Cox 96R50-97JR50
    1 point
  11. Now, Cargo area window MOLLE racks, there’s something we don’t have. I mocked one up from my 5th Gen T4R one &@TowndawgR50 & I did a little dissection at the junkyard to identify mounting points
    1 point
×
×
  • Create New...