Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 06/26/2018 in all areas

  1. After being part of R50 pathfinder family for so many years, Sfcreation is now looking to enter the R51 Pathfinder one. We will soon bring to market our 1", 1.5" front spacers and our 1",2",3" rear spacers. Now since the R51 pathfinder is IFS and IRS, of course the real height of the lift will be greater than the height of the spacers. This is where you come into play ! 2 options are available: 1) If you have a pathfinder R51 and you live near my location (Ste-Catherine, QC), and willing to drive to it, You'll get the lift kit, and I'll install it with you! Reserve yourself a full day ! Measurements will also be taken for a full set of skidplates. 2) If you are good with tools and are not afraid to use them, I'll send you all the items of the lift kits. You will need to install them, send the pictures and you keep it all. All the spacers have been made using suspension items from an R51 (struts, coils), but now we need pictures and real life data about the height in order to finalize the new product introduction. If you are interessted, please contact me at (info @ sfcreation . com) and send me some pictures of your R51. I am looking for clean and very little (if any) rusted R51. This pathfinder will be immortalized on our web site, facebook page, etc.. so it needs to look good ! Je parle francais aussi.. donc aucun probleme avec ça ! Steve.
    1 point
  2. Have you checked the u-joints in the front driveshaft? Could have a worn joint that is making noise while "free spinning" in 2wd, but would go away under load while in 4hi.
    1 point
  3. If you're an R51 owner thinking about doing this, but are unsure of the quality, workmanship or reputation of Steve or his SFC products, do not hesitate! Steve is a great guy, who has produced very high quality products, paired with even higher quality customer service, for a very niche market. I can personally vouch for his R50 spacer kits and skid plates. I'm probably underestimating if I suggest that probably at least half of the lifted R50's on NPORA either are running or have run SFC products. Seeing this offer makes me wish I had an R51, as I'd be all over this! I'm very glad to see you looking to expand the line a bit, Steve!
    1 point
  4. That Toyota V8 is sooooooo nice, no more struggling to keep up with traffic! My wife has a GX470 which is the same thing as the V8 4Runner and it is amazing. You made a very good choice. My next vehicle will be a 97 or earlier Land Cruiser. Sent from my iPhone using Tapatalk
    1 point
  5. Well when ya get a deal like that, you can't say no! I can absolutely grab a pic.
    1 point
  6. I know I would buy an entire R50 from that man, haha
    1 point
  7. Dude you deserve the “Cleanest Pathfinder Award” and I’m pretty sure you should start a detailing business! Sent from my iPhone using Tapatalk
    1 point
×
×
  • Create New...