Jump to content

UPDATE - The host suffered a "Catastrophic Hardware Failure" (*specifics not shared) on 01/13 and the "latest available" backup for the website and database were restored.  At this point they have been unable to recover any later versions of the database.

     We are going to give them another 72hrs to pull off a miracle and find something later than 05/21 before we fully move forward with normal forum operations.  Maybe we'll luck out, but to be perfectly honest, it's not looking good.

     It is still recommended that new members wait to register for the time being, as any new accounts created before our final decision on a path forward is made, may not exist once this is taken care of. This is also true for new topics, posts, status updates, profile & account changes, etc.


As always, we appreciate your patience as ask that you hold on just a little longer.

-NPORA Mod Team

*Updated: 01/17/2022 6:54PM PST


  1. NPORA Announcements

    1. NPORA Announcements

      Check here for news and updates concerning NPORA's website and forum.

  2. General Topics

    1. Forum Guidelines

      If you are new here, please read our guidelines before getting started.

    2. New People Start Here!

      This is our new member section. Everybody is encouraged to introduce yourself and let us know a little something about you here. Welcome!

    3. General Forums

      This is our general forum section. Ask me not what goes here...

    4. Truck of the Month

      Submit your Pathfinder for Truck Of The Month!

    5. 76.9k
    6. Off-Topic

      Anything off-topic, not necessarily about Pathfinders. Keep it clean!

    7. Solid Axle Swaps, Hardcore Custom Fab

      This is the place to post about your SAS or any custom fabrication you've done to any Pathy.

  3. Pathfinder Discussion By Model Year

    1. 86.5-89 WD21 Pathfinders

      Forum for 1986.5-1989 WD21 Pathfinders

    2. 90-95 WD21 Pathfinders

      Forum for 1990-1995 WD21 Pathfinders

    3. 96-2004 R50 Pathfinders

      Forum for 1996-2004 R50 Pathfinders.

    4. 2005-2012 R51 Pathfinders

      Forum for 2005-2012 R51 Pathfinders.

    5. 2013-Present R52 Pathfinders

      Forum for 2013+ R52 Pathfinders.

  4. Classifieds

    1. NPORA Vendor Section

      Deals and specials on parts or accessories from NPORA Vendors.
      **Vendors Interested in posting here: please contact an Administrator for posting privileges.**

    2. Services

      Offer your appropriate services to NPORA members.

    3. Parts For Sale

      Sell your Pathfinder Parts or Off Road Parts here.

    4. Free Parts

      Got something that you want to give away? List it here.

    5. Parts Wanted

      Looking for parts? Post your requests here to see who's got what you're looking for.

    6. Vehicles For Sale

      Sell your rig here...

  5. Regional Areas

    1. 6k
    2. 1.3k
    3. 38
    4. 28
    5. 44
    6. 76
    7. 20
    8. 2.5k
  6. Community Corner

    1. Trail Run/Events

      If you have news of an upcoming event. This is the place to let us all know about it.

  • NPORA Forum Life Information

    05/01/2002 12:56 AM
    Startup Date
  • Who's Online   2 Members, 0 Anonymous, 13 Guests (See full list)

  • Recent Topics

  • Today's Birthdays

    1. conor356
      (28 years old)
    2. guampath
      (33 years old)
    3. lumichael0
      (41 years old)
    4. nckrawler
      (34 years old)
  • Recent Status Updates
    • Options

    • trekterrano

      Hi all - has been quite a while between posts/updates. Some health issues (heart) had put all on hold for quite a while. Am getting back to the build and, after the completion of the engine overhaul, got all back in and am closing out on some final areas. As part of this, I am removing most of the anti pollution gear, trying to simplify the vacuum lines and also fitting the Redline Weber kit. That has all progressed reasonably well apart from some connections not being clear as to what goes where and what can be deleted/capped. I made various sketches and notes when I dismantled but am no finding that some of the component markings have been lost in cleaning and handling.  In working through the pollution gear, I have been using the other excellent write ups on the forum although ones specific to the VG30i are few and far between.
      So, with all of that, I was hoping to get some advice/clarity on the following - numbers reference in the pic - tried uploading the pic but am getting message saying I can t upload. Hopefully this link will work - goes to same pic in shared dropbox file. https://1drv.ms/u/s!ArhBM0TeWGIago8uxSJwDKmMOe_snQ?e=achdZt :
      1.  Is a vacuum line under left side of carbie. I believe this goes up to the purge connector on the canister but, if not, is this OK to cap or should it connect to somewhere else?
      2. I believe this is a loop connection to the AB valve on the air cleaner. Can this be capped when I remove the AB valve or  something else?
      3. I wasn't sure on what this one was, whether vacuum or coolant (currently radiator/coolant is dry so wanted to sort before filling up fluids). If coolant, where is this leading to for connection? If vacuum, OK to cap?
      If the pipe from 1 in the pic doesn't go t the purge connection on the canister, where does the purge line connect? As the TBI has been swapped to the weber, very limited vacuum line connections now. 
      And the really strange one, underneath the front (drivers side here in Oz) are the metal fuel lines that come up the filter and return and, while they are all OK, in the same group is another steel line that departs this group and then goes across the front cross member to about mid way with right angle bend and then an end that looks like a flared end but a few mm back from the end of the [pipe, suggesting a rubber pipe connects to the pipe. The breather line from the fuel tank is connected and is connected to the cannister already so doesn't appear to be mixed with that. Am hoping to get a pic of this one on this coming weekend as well as try chasing it back along the length of the terrano underneath.
      Sorry for the long list of questions but i am really hopeful that some sage advice will be forthcoming and avoid me contemplating putting a match to it from frustration ?
      Thanks in advance to all             

    • curthart

      Currently everything is stock. Would like the option to go off road with ease. I do plan on going out camping and hikes

    • zakzackzachary

      I saw a nice green 96-99 Pathfinder on Bangor navy base in WA, if you're out here: lookin' good!

    • Gregspinosa

      Wazzup my fellow nissan ninja's

    • Adolph

      I do not own a Pathfinder but my wife and all our 4 kids have had or currently have Nissan products. Our oldest daughter has a 2014 Pathfinder. My son had a high mileage used 1989 Pathfinder (3.0L, 5 speed, 180,000+ miles) in college about 20 years ago - it was a blast to drive. It developed an exhaust leak which we had planned to fix, but he got rid of it before we repaired it. He is now a sales manager at a Nissan Dealer!!
      I am a retired mechanical engineer and enjoy old cars. I am currently getting my first new car road ready again. It is a 1972 AMC Ambassador, and it is the first car our kids ever rode in. I also have a 1968 AMX 390. I am a member of the AMC forum.
      The purpose of joining this forum is because I found a storage tub with about a dozen parts (most NOS genuine Nissan) that we bought for my son's Pathfinder but never used. I want to give forum members first shot at them before I go to Craigslist or other outlets. 
      I also will enjoy reading about the adventures of forum members.

Welcome to NPORA Forums


Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.



  • Create New...